How to Reset Epson Stylus Color Printers

There are 2 ways to reset epson printers counter, that is, youy can use software resetter (SSC or Adj Program) or reset manual. If Reset use software, you can follow the scent usage of software, if reset manual, using combination button in the printers.

Following some ways to reset manual Epson Printers:

1. EPSON Stylus Color
  • Pressing and holding ALT+FONT+LOAD+PAUSE buttons combination
  • Press POWER button
  • Release all buttons
2. EPSON Stylus Color 300
3. EPSON Stylus Color 400, 600
  • Pressing and holding LOAD/EJECT and CLEANING buttons
  • Press POWER button and hold it until you will see blinking INK OUT and PAPER OUT leds
  • Release all buttons
  • In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.

4. EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160
  • Pressing and holding LOAD/EJECT and CLEANING buttons
  • Press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
  • Release all buttons.
  • In 2-3 seconds time press and hold CLEANING button, until all leds will blink.

5. EPSON Stylus Color 680
  • Pressing and holding LOAD/EJECT and CLEANING buttons,
  • Press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
  • Release all buttons.
  • In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will blink.

6. EPSON Stylus Photo 785, 895
  • Pressing and holding Maintenance and Roll Paper buttons
  • Press POWER button, You will see blinking Error led.
  • Release all buttons.
  • In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.

7. EPSON Stylus Photo 890, 1280, 1290
  • Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led
  • Release all buttons
  • In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink
  • In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.

8. EPSON Stylus Color 800, 850
  • Pressing and holding LOAD, CLEANING Color and CLEANING Black buttons
  • Press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
  • Release all buttons.
  • In 2-3 seconds time press and release CLEANING Color button, You will see leds blinking.

9. EPSON Stylus Color 900, 980
  • Pressing and holding LOAD/EJECT and CLEANING buttons
  • Press POWER button, You will see blinking INK OUT led
  • Release all buttons
  • In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.

10. EPSON Stylus Color 3000
  • Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons
  • Turn on printer.
  • Release all buttons.
Labels: