# Dimensions
# 12" x 13.05" (30.5cm x 33.2cm)
CPU
# Dual 771-pin LGA Sockets
# Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
-Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16 GHz
-Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor) up to 3.40 GHz
*Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors
System Bus
# 1333 / 1066 / 667 MHz system bus
Operating System Software
# Supports 64-bit Operating Systems
# Supports 32-bit Operating Systems
System Memory
# Eight 240-pin DIMM sockets
# Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
# Dual branch memory bus
# Memory must be populated in pairs
# Memory Mirroring supported
# Memory Type: 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
# DIMM Sizes: 512 MB, 1GB, 2GB, 4GB
# Memory Voltage: 1.8V only, 1.5V(AMB)
# Corrects single-bit errors
# Detects double-bit errors (using ECC memory)
# Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
Chipset
# Intel® 5000P (Blackford) chipset
# MCH + PXH + ESB2
