Sometimes our computer got error or corrupton the hard drive when you start the computer here's a little solution ways how to fix it .
- If your harddisk is Corrupt you try to make the slave on another computer and run checkdisk with Microsoft or third-party program, if there is a corrupt file note which files are corrupt and replace with another hard drive with windows files the same version ie both SP1 or SP2.
- Your Harddsik is corrupt or not detect, try to open the existing data cable on harddisk and then insert it correctly , try to turn on his computer,if you still can not detect the harddisk, try to get into the bios and bios settings to default settings, usually just click F5 to restore the default bios settings of your computer. Other causes: IDE controller defective
If the directory \ WINDOWS \ SYSTEM32 \ CONFIG damaged or missing If you get the following error message: "Windows Could not Start Because the Following files is missing or corrupt \ WINDOWS \ SYSTEM32 \ CONFIG \ SYSTEM or \ WINDOWS \ SYSTEM32 \ CONFIG \ SOFTWARE"
Solution:
- Insert the Windows XP CD and boot from the CD.
- When the options appear first R = Repair, press the R key
- Press the number that corresponds with the location of the Windows installation you want to repair.
- Usually # 1 - Enter the administrator password if necessary.
- Write: cd \ windows \ system32 \ config
- Next depending on the location.
Damage:
- Write: ren system / broken.system
- Next depends on the location.
Damage:
- Write: copy \ windows \ repair \ system
- Write: copy \ windows \ repair \ software
- Remove your CD and type exit.
