These tips I found on the other bloggers .. but I forgot the name blogger.
canon mp 145 printer has a problem most of the ink cartridge. no longer used or even frequently used are usually cartridge Canon MP145 often trouble.
We will feel irritated when the moment we need the print on the spot with the urgent work required to in print now but at the time our printer is not functioning because of the troubleshooting as below.
1. Turn off the printer (power cable is still On), press and hold the STOP / RESET then press the ON / OFF.
2. Hold down the ON / OFF, press the STOP / RESET 2x.
3. Remove the button and the printer will enter SERVICE MODE.
4. Printer will charging.
5. When the printer finished charging, press the STOP / RESET 4x.
6. Each time the button STOP / RESET button, light ON / OFF will turn green and orange colors.
7. Turn off the printer and remove the POWER cable.
8. Turn the printer back.
Canon MP145 Error code.
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16-E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF (cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error --
E29 = EEPROM error
E33 = Paper feed position error
E35 - 15 = USB Host VBUD overcurrent error - USB
E37 - 17 = Abnormal motor driver error
E40 - 20 = Other hardware error
E42 - 22 = Scanner error
