Lost Windows Recovery/installation Cd Disk How To Fix

But how do you restore your windows installation cd image from hidden partition?

We hope that is what he did, producer copy of Windows XP CD-ROM image on your hard drive. Hard drives are so large these days that it takes up little space and has some advantages speak in a second.

To determine if the image of the CD ROM will appear on your computer, look for a folder called I386. There may be different, but what interests us in the vicinity of 7000 contains the files that are two of them and Winnt.exe winnt32.exe. 

The I386 directory is typically one of the top-level directory on the CD-ROM distribution, but above is the directory that contains the distributed copy of Windows XP. Winnt.exe and Winnt32.exe are the DOS and protected mode setup programs, respectively. (You should only need this if you intend to see to reinstall Windows XP from scratch – I use it as an easy way that we have the correct directory.) Now that you know that the CD – What happens if ‘ image ROM calls following the CD-ROM?

Do not worry, it’s actually quite simple. Insert a rule, the "CD" message is only an OK button and "Cancel". Press OK, so you can not. In the next dialog box, called a rule, give the location of the CD-ROM, simply type the full path to the I386 folder have previously discovered.

That’s it. But it gets better. Windows remembers. Now that you mentioned, where the Windows installation CD-ROM is to remember, dass The next time you are in a situation that might require the installation CD of Windows is at first sight when he discovers what is not needed then to worry about asking.

Personally, I think the practical thing – so that even if I close my Windows CD I’m also on my hard drive and copy of Windows at this point you copy the first time you have requested. Then it is not necessary to think or to insert the CD. And this technique works for many other CD-ROM products, including Microsoft Office.

Fix CD-ROM and DVD Problems

We all love entertainment, CD-ROM and DVD-ROM are one of its source.

Below are common problem that every users should know.

Problem 1:
System will not boot from CD-ROM or DVD drive.

Cause:

1. Removable Media Boot is disabled in the Computer Setup utility.
2. Network Server Mode is enabled in Computer Setup.
3. Non-bootable CD in drive.
4. Bood Order not correct.

Solution:

1. Run the Computer Setup utility and enable booting to removable media in Storage > Storage Options, Ensure IDE CD-ROM is enabled in Storage > Boot Order.
2. Run the Computer Setup utility and disable Network Server Mode in Security > Password Options.
3. Try a bootable CD in the drive.
4. Run the computer Setup utility and change boot sequence in Storage > Boot Order.

Problem 2:
CD-ROM or DVD devices are not detected or windows driver is not loaded

Cause:
Drive is not connected or not properly configured

Solution:
See the documentation that come with the optional device.


Problem 3:
Movie will not play in the DVD drive.

Cause:

1. Movie may be regionalized for the different country.
2. Decoder software is not installed.
3. Damaged media.
4. Movie rating locked out by parental lock.
5. Media installed upside down.
   

Solution:

1. See the documentation that come with DVD drive.
2. Install decoder software.
3. Replace media.
4. Use DVD software to remove parental lock.
5. Reinstall media.

Problem 3:
Cannot eject compact disc (tray-load unit).

Cause:
Disc not properly seated in the drive.

Solution:
Turn off the computer and insert a thin metal rod into the emergency eject hole and push firmly. Slowly pull the tray out from the drive until the tray is fully extended, then remove the disc.


Problem 4:
CD-ROM, CD-RW, DVD-ROM, or DVD-R/RW drive cannot read a disc or take too long to start.

Cause:

1. Media has been inserted upside down.
2. The DVD-ROM drive takes longer to start because it has to determine the type of media played, such as audio or video.
3. CD or DVD disk is dirty.
4. Windows does not detect the CD-ROM or DVD-ROM drive.

Solution:

1. Re-insert the Media with the label facing up.
2. Wait at least 30 secs to let the DVD-ROM drive determine the type of media being played. If the disc still does not start, read the other solution listed for this topic.
3. Clean CD or DVD with a CD cleaning kit, available from most computer stores.
4. Use Device Manager to remove or uninstall windows driver in question, the restart your computer.

Problem 5:
Recording audio CDs is difficult or impossible.

Cause:
Wrong or poor quality media type.

Solution:

1. Try using a slower speed when recording.
2. Verify that you are using the correct media for the drive.
3. Try a different brand of media Quality varies widely between manufacturers.