PC,Printer,etc Cleaning Tips

  • General cleaning tips 

    • Never place your computer on the ground, always use computer table or shelf for this purpose.
    • To clean computer case first unplugs your system power from the electrical outlet. Remove all cables and connectors from the back side of your computer.
    • Now blow the air around all the hardware components and keeping away your blower nozzle 4 to 5 inches away from main board components. You can use vacuum cleaner also for this purpose but compressed air is the better solution to clean a system.
    • At the end using lightly dampened cloth or spray any cleaning fluids on the computer case and use paper towel to dry it.
    • Never clean inside computer components or other circuit board with damp or wet cloth.
    • Always be careful to eat or drink around the computer

    Computer Cleaning Tools


    • Cloth - For computer cleaning use the lightly dampened cloth on the computer case and use paper towel to dry it. But avoid to cleaning inside computer components or other circuit board with damp or wet cloth.
    • Cleaning fluids - spray any cleaning fluids on the computer case and use paper towel to dry it.
    • Compressed air - use the compressed air and start clean from back to front of your computer case, specially casing and power supply fan.
    • Lens cleaning kit - Always use lens cleaning kit to clean drive lens that specially designed to clean


    Clean computer Casing ?


    • Never place your computer on the ground, always use computer table or shelf for this purpose.
    • To clean computer case first unplugs your system power from the electrical outlet. Remove all cables and connectors from the back side of your computer.
    • Now use the compressed air and start clean from back to front of your computer case, specially casing and power supply fan.
    • At the end using lightly dampened cloth or spray any cleaning fluids on the computer case and use paper towel to dry it.



    CD-ROM Cleaning Tips
    • If your CD drive creating problem to read CD disc, taking time to read and showing message there is no disc in the drive. These are the symptoms of dirty or weak CD-drive lens, because dirty lens can create errors in reading or writing and soon will not work at all.
    • Follow the given steps to care and clean a CD-Drive.
    • First make sure your discs are clean, unscratched and you’re loaded it properly.
    • Always use laser lens cleaner to clean drive lens.
    • Insert the laser lens cleaner disc and play it for 2 to 3 min.
    • Using CD drive cleaner properly clean the CD-ROM laser from dust. If your drive still creating problem then open it and clean the lens with a cotton swab.




    Headphones Cleaning Tips



    • Never leave your headphone in the sunlight because it can damage the magnet of headphone.
    • To clean the general area of headphone using lightly dampened cloth or spray any cleaning fluids.
    • Always use lightly dampened cloth with warm water to rub the head and earpieces of the headphones.
    • You should keep your headphones by hanging on the wall hook.
    • Motherboard Cleaning Tips
    • To clean your motherboard first unplugs your system power from the electrical outlet.
    • Using the screwdriver remove the side covers of your computer case and put them to one side.
    • Check all data and power cables connections. Inspect all motherboard PCI and AGP slots.
    • Remove all add-on card of your motherboard for example RAM, modem, VGA, sound card and LAN card.
    • Now blow the air around all the motherboard sides and keeping away your blower nozzle 4 to 5 inches away from main board components. You can use vacuum cleaner also for this purpose but compressed air is the better solution to clean a system.
    • At the end assemble back all cards, cables and side covers of your system.




    Mouse Cleaning Tips


    • First disconnect your mouse from the back side of the computer.
    • Now read the mouse manufacturer manual about your mouse model on how to safe and clean it.
    • Open the ball cover from the back side of the mouse and wash the ball then dry it with cloth.
    • Now clean dust in the inner side of the mouse specially removes the dust on the rollers with lightly dampened cotton bud. You can use the compressed air for this purpose.
    • At the end dry it and Re-assemble your mouse then connect




    Scanner Cleaning Tips

    • To clean the scanner first unplugs your system power from the electrical outlet.
    • Always clean the glass of your scanner with any optical surface cleaning fluid.
    • This process should be done after every three months if you want to save your scanner life.








    Laser Printer Cleaning Tips



    • Never place your printer on the ground, always use table or shelf for this purpose.
    • If you have the printer manufacturer manual, first read about on how to safe and clean it.
    • Now disconnect your printer from the back side of the computer and unplug power from the electrical outlet.
    • First use the compressed air to clean dust, toner powder from the outside and inner side of the printer.
    • Use lightly dampened cloth or cleaning fluid to clean the body of the printer and avoid to spraying fluid near any holes on the printer.
    • Use paper towel to clean the toner and brush to clean the inside of the printer.
    • Always cover your printer with dust cover