If you want to install windows 98 on your computer you have to create partition and then format the disk then you can install Windows XP 98. To install Windows XP 98 follow the steps given below:
1. Insert the Windows 98 Startup disk in the floppy disk drive, and then restart your computer.
2. When the Windows 98 Startup menu is displayed, choose the Start computer with CD-ROM support option, and then press ENTER.
3. If CD-ROM support is provided by the generic drivers on the Startup disk, you receive one of the following messages, where X is the drive letter that is assigned to your CD-ROM drive:
Drive X: = Driver MSCD001
Drive X: = Driver OEMCD001
NOTE: If your CD-ROM drive is not available after you boot from the Windows 98 Startup disk, install the CD-ROM drivers that are included with your CD-ROM drive. For information about how to obtain and install the most current driver for your CD-ROM drive, view the documentation that is included with your device, or contact your hardware manufacturer.
4. Insert the Windows 98 CD-ROM in the CD-ROM drive, type the following command at a command prompt, and then press ENTER
X:\setup
where X is the drive letter that is assigned to your CD-ROM drive.
5. When you receive the following message, press ENTER, and then follow the instructions on the screen to complete the Setup procedure:
Please wait while the Setup initializes. Setup is now going to perform a routine check on your system. To continue press Enter.
If you want to replace windows 98 and want to Install Windows XP it would be easily.
Showing posts with label Install Windows XP 98. Show all posts
Showing posts with label Install Windows XP 98. Show all posts
Hard disk space required for installing Windows XP SP3 on more than one computer
If you want to install Windows XP SP3 on more than one computer over a local network, you can use the Universal Naming Convention (UNC) mode of installation. Windows XP Installation Process is more typical so it need careful instruction.
To install Windows XP SP3 by using the UNC mode of installation, follow these steps:
1. Copy the contents of the Windows XP SP3 CD to a shared folder on the network.
2. Click Start, click Run.
3. Type cmd, and then press ENTER.
4. At the command prompt, type the following command, and then press ENTER:
windowsxp-kb936929-sp3-x86-enu.exe /x:shared folder name
Note In this command, shared folder name is a placeholder for the folder on the network to which you want to extract Windows XP SP3.
5. Under the shared folder on the network, locate and then double-click the Update folder.
Note The Update folder is located under the i386 folder.
6. Double-click the Update.exe file to install Windows XP SP3.
To install Windows XP SP3 by using the UNC mode of installation, follow these steps:
1. Copy the contents of the Windows XP SP3 CD to a shared folder on the network.
2. Click Start, click Run.
3. Type cmd, and then press ENTER.
4. At the command prompt, type the following command, and then press ENTER:
windowsxp-kb936929-sp3-x86-enu.exe /x:shared folder name
Note In this command, shared folder name is a placeholder for the folder on the network to which you want to extract Windows XP SP3.
5. Under the shared folder on the network, locate and then double-click the Update folder.
Note The Update folder is located under the i386 folder.
6. Double-click the Update.exe file to install Windows XP SP3.
Subscribe to:
Posts (Atom)